Young Shin Revotec – Foil Stamping and Embossing 1040FS

Description

The Young Shin REVOTEC 1040FS is a hot foil stamping machine. The innovative technology of the 1040FS sets this unit apart from its competitors. The REVOTEC 1040FS only requires a foil path of 6’ as compared to 40’ on other brands. The foil also travels with the sheet in the same direction eliminating the excessive leader often required by other competitors while shortening the foil’s transport and path through the stamper. The REVOTEC 1040FS features the many advantages offered in the highly-acclaimed REVOTEC series including:

An economical investment with initial and operational cost savings
UL-certified electronics including UL-wiring
Offers a 20% greater weight advantage when compared to other rival models
A 25% greater impressional tonnage capacity

Specifications

Download PDF Floor Plan

REVOTEC 1040FS Series

Maximum Sheet Size	1040 x 740 mm
Minimum Sheet Size	440 x 340 mm
Maximum Cutting Size	1040 x 730 mm
Inside Chase	1100 x 764 mm
Cutting Pressure	300 Tons
Maximum Cutting Speed	6600 sph
Maximum Stamping Speed	5000 sph
Sheet Thickness	Carton Board: 0.1 ~ 1.5 mm Corrugated Board: (B Flute) : 4 mm)
Weight	20 Tons

Foil Stamping

Maximum Foil Dimension	Ø 200 mm
Foil Width	30 ~ 1020 mm
Foil Puller Sheet – Longitude Foil Puller Sheet – Latitude	3 Shafts 2 Shafts
Rewinding Shaft – Longitude Rewinding Shaft – Latitude	6 Shafts 2 Shafts
Heating Zone	12 Zones
Temperature Control Range	200° C
Rewinding Box	6 Shafts

Information

	AIR BLOWER Sheet and foil can be separated with the unit’s integrated air blower – both longitude and latitude.
	FEEDER Thin sheets and corrugated boards can be smoothly fed into the 1040FS via its suction device.
	MAIN TOUCH SCREEN Clear and simple readings ensure quick settings and adjustments to the foil.
	FOIL DRIVING (LONGITUDE) Foil transferring is achieved via the unit’s internal Servo motors.
	REWINDING BOX (LONGITUDE) Rewinding is accomplished using the air shaft. This one-touch system is used to set the paper tube onto the shaft (waste foil disposal).
	SUB TOUCH SCREEN This allows the operator to check the machine’s condition and settings for foil adjustments.
	UNWINDING DEVICE (LONGITUDE) This maintains foil tension utilizing the vacuum and friction.
	REWINDING DEVICE (LATITUDE) Maintains foil tension with the Servo motors and disposes of the foil waste for rewinding.
	SWITCHING DEVICE Device that automatically handles foil waste.
	DELIVERY SECTION Sheets are piled up neatly with side joggers.